Our first watch produced entirely in-house in our Calgary shop is here! The Exos Bronze is the first of 4 uniquely coloured Exos pieces planned for 2023. Get it now before it's gone forever!
Arcus Exos · Bronze · CAD $7,500
Limited Edition - Pièce Unique (1/1)
904L Stainless Steel Case
39.00mm Case Diameter
45.60mm Lug to Lug
20.00mm Lug Width
Circular Brushed Anodized Titanium Dial with Polished Steel Applied Indexes
Polished Steel Hands
AW-210 Hand Wound Movement
AR Coated High Dome Sapphire Crystal
Sapphire Caseback Crystal
3ATM Water Resistance
Limited Edition - 1 Unit
Making the Arcus Exos
In October 2021, we decided to pursue one of our biggest goals since the start of Arcus - self-sustainable in-house manufacturing. While it has been a long and arduous journey, we're incredibly proud of how far we've come. See the progression of various parts in the gallery below:
Late 2021, we began thinking about how we can manufacture all of the parts of our case with our machines. In the beginning, as a proof of concept we started with a bezel. It gave us a good idea of the tolerances we needed to maintain while also being simple enough that we could turn it on a manual lathe. Satisfied with the results we plowed further ahead annd worked our way through the various stages of manufacturing and finishing. Everything from cutting the 55mm 904L stainless bar, all the way to the final finish was an intense but rewarding experience. In the end, it was amazing to see it all come together in the form of a finished case.
Work on the AW210 began early January 2022. The first step was to create all our models and drawings to bring our concept to life. By late February, the first brass prototype was ready and tested. At that point we started working on our stainless steel bridge prototypes with further improvements.
Video of the AW210 coming to life for the first time ever.
It was only by the end of April that the first steel prototype was finished and working properly. From that point on we focussed on final refinements and finishing of the movement, resulting in the production model. The differences in finishing are very evident between our prototype (left) and final model (right).
Dial and Hands
Althought this process was a bit simpler for us than the casemaking and movement, since we felt quite at home with micro-machining, nonetheless it presented us with quite a few new challenges. Noteably, it was one of our first attempts at pad printing and Titanium anodizing. Looking forward, we're exctied to see the remaining three dials come to life with their exotic colour ways.
To stay informed about future releases of the remaining Exos models, sign up for our newsletter below!